Transform Your Bath Space - Installation Guide For New Shower Units

Get A Quote



Each person has their own idea in relation to Simple ways to Install a Shower Cubicle on Your Own.


How to Install a One-Piece Shower Unit
An effective shower installment calls for careful preparation and also a great deal of job. In most cases, you will need to do three types of tasks: framing wall surfaces, installing the plumbing, and completing wall surfaces.

Prep work


To start with, you need to pick the sort of shower that you desire to install. It is essential to determine whether the selected shower is capable of dealing with specific systems as well as can control a risk-free degree of water via the central heating boiler. Most shower units nowadays are designed to be versatile to different water pressures (such as stored hot water and cold mains).
It is also essential to take into account the water pressure and the planning of the piping and drainage for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The pipe and also spray parts of the push-on mixer shower device can be attached to the bathroom faucet according to your demand, as well as the water temperature can be readjusted using the taps. Push-on mixers are cheap and also very easy to mount. Nonetheless, although the hose pipe connection is straightforward, it is conveniently removed. Additionally, it is inconvenient to readjust the temperature.

  • Bath/Shower Mixer: The tube as well as spray of this type of shower are incorporated with a bathroom mixer tap, and also the temperature level can be changed through the bathroom taps. It is a very low-cost option and also no additional plumbing is entailed. Nevertheless, the bath/shower mixers also deal with troublesome temperature control alternatives.

  • Manual Mixer: The tube as well as spray of a manual mixer shower system are a part of the wall surface system and also the hot and cold water supplies are linked to a single shutoff The temperature and also pressure of the water are controlled via either one or a range of handles (in much more expensive showers). Although temperature level control is much easier in hands-on mixer types, they are a lot more expensive than the formerly pointed out mixers. They also need additional plumbing of cold and hot water supply pipelines.

  • Thermostatic Mixer: The hose as well as spray of this shower kind are a part of the wall surface unit as well as the hot and cold water products are linked to a solitary valve right here too. It is total with an integrated stabiliser to self-adjust the water temperature as well as to prevent it from ending up being also warm. One of the most significant benefits of a thermostatic mixer shower kind includes hassle-free temperature control. Nevertheless, it is one of the most expensive of the different mixer alternatives.

  • Power Shower: A power shower is a single system containing a powerful electrical pump that can altering both the water stress and also temperature. This kind of shower can be fitted if there is water supply from a cold water tank and also a hot water cyndrical tube. A power shower makes the adjustment of both pressure as well as temperature level easy. On the other hand, it is unsuitable for water heated up straight by the shower or where the water is provided by a combination boiler under keys pressure.

  • Electric Shower: An electrical shower is plumbed right into a mains cold water supply and it heats up the water electrically. It is necessary to keep in mind that for this shower kind to be installed, the keys stress requires to be at least 0.7 kg/sq cm (10lb/sq in). The unit enables the temperature level and also stress to be adjusted via a knob. Designs with temperature level stabilisers are much better as they continue to be untouched by various other taps somewhere else in operation within the house. A significant downside of electric showers is that the control handle just enables the choice of high temperatures at less pressure, or lower temperature levels at a better stress. This is bothersome in the winter when the spray is commonly weak as well as the mains water is colder. However, this problem is taken on in some versions which are available with a winter/summer setting.


  • Approach


    Depending on the type of shower you desire to mount, the shower head need to either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it should have a check valve.
    Prior to beginning, it is recommended to mark the positions of the shower head and also control, as well as to prepare the pipe-work involved. In addition, the drain system to remove the drainage will require to be prepared. Both positions of the cable television route as well as the shower switch will certainly likewise require to be thought about if an instantaneous or electrical shower unit is being mounted.
    Utilize the guideline guide provided with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is very important to remove the water supply. In order to secure the pipes, they need to be offered a water resistant covering and additionally fitted with isolating shutoffs. The pipes can after that be buried into the wall and also glued over to neaten the overall appearance.
    Fit the base tray, shower head, as well as fittings.
    Attach the primary shower control to the pipes that will certainly be providing the water (This may call for a female screw string adapter).
    Reconnect the water system as well as test the pipelines for any leaks, as some might require tightening.
    If you are installing an electric shower, keep in mind to switch off the power supply prior to making any type of electrical connections. When these connections have been made (there should be guidance within the user's manual), the power supply can be switched over back on.

    Changing Water Pressure to Suit Your Shower


    The cold water reservoir can be raised to a higher height (in some cases as little as 150mm (6inches)) by installation a solid wooden support under it - perhaps made up of struts and also blockboards. If you pick this choice, the primary as well as distribution pipes will additionally need to be increased to satisfy the new height of the tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it has to be attached right into the power supply in order to operate.

    Piping and Water drainage


    It is best to use 15mm size supply pipelines, and also make the go to the shower as brief and also straight as feasible so regarding preserve maximum pressure as well as minimise warmth loss. In addition, by reducing the use of elbows for pipe corners, you can lower the resistance in the circulation of the water. You can attain this by flexing the pipelines rather.

    Most Common Mistakes


  • Violating or ignoring local code restrictions.

  • Using pipes that are too small.

  • Affixing copper to galvanized without making use of a brass or dielectric suitable in between the two.

  • Not using tape or pipeline substance at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not installing an air void loading for components.

  • Reducing supply stub outs as well short to install the shutoff valves onto after the finished wall surface is in place.

  • Not properly aligning tubes right into fittings or stop valves. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will certainly trigger a leakage.).

  • When turning the water back on in your home, constantly run the outdoors hose pipe valve or flush your commodes to hemorrhage dirt and air from the lines. This particles can trigger issues in your sink faucets and also various other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Build a Shower Enclosure for Your DIY Bathroom

    Hopefully you enjoyed our piece about How to Install a Direct-to-Stud Shower Enclosure. Thanks a ton for spending some time to browse our article post. Loved our posting? Please share it. Help other people check it out. I praise you for your time. Don't forget to visit our website back soon.




    Booking Page


    Leave a Reply

    Your email address will not be published. Required fields are marked *